본문 컨텐츠 바로가기

컨텐츠 주요 내용

[TOP]

Heating JacketCE Mark

  • 히팅자켓
  • 히팅자켓
  • 히팅자켓
  • 히팅자켓

Heating Jacket

The product received CE certification and UL certification and it used special materials for high-temperature flame
retardant is authenticated at home and abroad, and inside. There is an excellent product and can use for the various
devices safely.

Purpose of use

ㆍSemiconductor manufacturing equipment, PILOT PLANT heating and thermal insulation.
ㆍUse for dry etch of FAB Line, LP-CVD process, CVD process of LCD Line.
ㆍPump to Scrubber
ㆍChamber to Pump Line
ㆍVacuum Line
ㆍCVD Process Line
ㆍEtch Process Line
ㆍPoly Process Line
ㆍGas Delivery Line
ㆍExhaust Line
ㆍBake-out Chamber
ㆍValve, Pump, Vacuum Line, Pipe, Flange, Elbow heating and insulation of curved or irregular shaped parts.
ㆍUse to prevent of the melted material coagulation to the pipe, gas container and Cylinder N2 Gas Cylinder, Y-Cylinder.
ㆍ Use for "various sizes, various forms of" Flask, Beaker, tubes, quartz tube, chemical vessel heating.
ㆍUse for a constant viscosity heating the various resin materials.
ㆍPrevent of coagulation phenomenon after dissolving the metal material (gold, silver, zinc, copper or the like).

히팅자켓

Specification

Name Composition Heat-resisting Temperature Using Temperature
Outer covers, Inner covers
Silica Cloth Aluminium Foil Coating
500℃ 350℃
E-glass fiber Aluminium Foil Coating
500℃ 250℃
E-glass fiber Teflon Coating
450℃ 250℃
E-glass fiber Silicone Coating
560℃ 350℃
PTEF
300℃ 260℃
Silica Cloth
900℃ 650℃
Silica Cloth High Temperature Cloth
1650℃ 800℃
internal insulation
Lastan (4~15T)
1000℃ 850℃
Silica Wool (6~12T)
900℃ 800℃
Ceramic Wool (5~50T)
1000℃ 850℃
E-glass Wool (5~15T)
500℃ -
Heater and safety device
Heater (Japan Alliance)
   
Nichrome Wire, Kanthal Wire, Glass Coating Nichrome Wire
   
Thermocouple (T/C), K-type, J-type, E-type, Pt100Ω-type
   
Equipped by capacity
   
Buzzer for temperature setting, reset switch
   
Overcurrent protection ELB
   
Operating voltage
AC 100VAC, AC220VAC, AC380VAC, AC480VAC
   
Characteristic
Capacitance Tolerance ±10%
   
nsulation resistance value over 1000Ω
   
Withstand voltage
   

To improve the quality of the product, price, specifications and design are subject to change without notice.

Feature

ㆍTo consist of high-purity silica fibers (Silica Cloth) lighter products. (Silica Cloth: 96% Sio2 high-purity silica fibers is flame retardant and flame retardant treated also it withstand high temperatures and low temperatures as well as a strong force material.)
ㆍExcellent thermal response, flexibility, adhesion
ㆍNo change in form at a high temperature.
ㆍThe external surface of the aluminum coating was preventing fine dust emission and absorption, appearance is wonderful.
ㆍThe heater (hot wire) has long life because made with strong kanthal, Nichrome wire column.
ㆍManufactured variety of shapes according to the heated object type, it can be installation to easy without interference.
ㆍCan be manufactured in a wide temperature range(20°C~ 700°C) as user's using situation.
ㆍManufactured by a various materials - silica Cloth, Teflon, Fiber Glass, silicon, Lastan.
ㆍT / C and Bimetal Thermostat Fuse Built-in (the seperate temperature controller necessary)
ㆍVariety of orders are possible, so you can be at the same time, each controlling multiple Heating Jacket in series or in parallel.
ㆍMust be used in conjunction with a separate thermostat.
(Mortality of the thermostat, GLTC-D, we recommend GLTC-DP.)
ㆍPrevent heat loss outside and reaches a desired temperature in a short time and maintain a constant temperature.
ㆍBy blocking the heat generated by the inner and outer Jacket easy to work, and to minimize the outside temperature was designed to avoid burns.
ㆍVariety of sizes, thickness, length and thickness can be made.
ㆍTo shorten the production time to complete the process was supplied in a short time.
ㆍThorough management and A / S after supply.

Heating Jacket Exploded view

Heating Jacket Exploded view

Contractors

Applications

Heating Jacket

[TOP]

Cylinder Heating Jacket

  • 실린더 히팅자켓
  • 실린더 히팅자켓

Feature

ㆍTo consist of high-purity silica fibers (Silica Cloth) lighter products.
ㆍExcellent thermal response, flexibility, adhesion
ㆍNo change in form at a high temperature.(Silica Cloth, Teflon, FiberGlass, Silicon, Lastan)
ㆍLong life.
ㆍCan be manufactured in a wide temperature range and material/
ㆍT / C and Bimetal Thermostat Fuse Built-in (the seperate temperature controller necessary).
ㆍLasts after reaching the desired temperature in a short period of time.

실린더 히팅자켓

Power Characteristics

Capacity Tolerance ±10%
Insulation resistance value over 1000Ω
Withstand voltage 1500V/min

Working Voltage

AC100VAC~440VAC,50/60Hz. Single-phase or Three phases.

Workable Temperature

10°C ~ Max 650°C

Outer covers
Silica cloth AL coating
E-Glass fiber cloth
Silica cloth teflon coating
Inner covers
Silica cloth high temperature cloth
E-glass fiber cloth silicone coating
Insulation
Ceramic Wool
Lastan
Glass Wool
Super Wool
Heater Element
KanThal wire
Ni-Cr wire
Silica coating wire
Sensor
pt 100Ω type
"K"(ca) type
Velcro
Resistance to Flame or Flame Resistant Velcro
Yarn
Non Flammable aramide yarn
Jacket Thickness
5t~50t

* To improve the quality of the product, price, specifications and design are subject to change without notice.

실린더 히팅자켓

[TOP]

Line Heating Jacket

  • 라인 히팅 자켓
  • 라인 히팅 자켓

[TOP]

Chamber Reactor Heating Jacket

  • 반응조 히팅자켓
  • 반응조 히팅자켓
  • 반응조 히팅자켓

[TOP]

Insulation Jacket

  • 단열자켓
  • 단열자켓

Purpose of use

Insulation jacket using for semiconductor manufacturing equipment, such as heating equipment
such as heating equipment or connections are various Pipe, tube, tank, Cylinder, aims to ensure physical and chemical containers are supplied without a cool down so smoothly Gas and solution heat insulation by not clot.
By Chamber or Chamber of pipe after the equipment used to maintain the Line temperature insulation and heat insulation prevents the worker burns. (Internal temperature is 300°C when the outside temperature below 50° C).
Using in advanced equipment FAB Line Dry Etch, mainly used by LP-CVD process and CVD process of LCD Line.

ㆍPump to Scrubber
ㆍChamber to Pump Line
ㆍVacuum Line
ㆍCVD Process Line
ㆍEtch Process Line
ㆍPoly Process Line
ㆍGas Delivery Line
ㆍExhaust Line
ㆍBake-out Chamber
ㆍChamber, Valve, Pump, Vacuum Line, Pipe, Flange,insulation of curved or irregular shaped parts.
ㆍLCD Camber and external insulation

단열자켓

Feature

ㆍEasy to install.
ㆍNo change in form at a high temperature.
ㆍUsed harmless fiber and materials(Ceramic wool, Lastan, Silica cloth, E-glass, Silica Teflon Coating).
ㆍVariety thickness available. (2T, 5T, 8T, 10T, 12T, 15T, 20T, 25T, 50T)
ㆍ Excellent thermal insulation.

Specifications

ㆍMain body : Silica Cloth, AL Coating, Fiber Glass Cloth, E-glass, Silicone Coating
ㆍSilicon Rubber
ㆍInsulation material : Ceramic Wool(Fiber Glass). Lastan, Silicone
ㆍInstallation method : Velcro, hook, belt

단열자켓

Feature of "Sunsil"

Asbestos (Asbestors) is Sio2 a purity of about 96% Silica fiber as a substitute.
Long-term continuous use temperature of 800°C, a heat-resistant material that can withstand momentary temperature to 1600°C.
Insulation materials are safe and harmless to the human body. Chemical resistance and electrical insulation.

Feature of "Lastan"

Lastan will not burning or melting in the air because of it processed with special acrylic fibers.
No particulate matter or skin irritation such as asbestos or glass fibers.
Soft and lightweight products it passed from the Japanese Jis Al323 standards.
And provides superior performance in high temperature and it constructed with heat or flame protection fiber.

Applicationcase

단열자켓

[TOP]

Silicone Rubber Heater

  • 실리콘 러버 히터실리콘 러버 히터실리콘 러버 히터
  • 실리콘 러버 히터실리콘 러버 히터실리콘 러버 히터

Silicone Rubber Heater

ㆍSilicone Rubber Heater is using for the equipment parts production in almost of manufacturing company.
ㆍPilot Plant and semiconductor manufacturing equipment such as heating and thermal insulation.
ㆍAnd mostly used in Dry Etch, LP-CVD process and the CVD process of the LCD Line FAB Line.
ㆍPump to Scrubber
ㆍChamber to Pump Line
ㆍVacuum Line
ㆍCVD Process Line
ㆍEtch Process Line
ㆍPoly Process Line
ㆍGas Delivery Line
ㆍExhaust Line
ㆍBake-Out Chamber etc.

ㆍUsed in insulation and heating of Valve, Pump, Vacuum Line, Pipe, Flange, Elbow, such as the shape of uneven or curved sections.
ㆍUsed for heating of various Pipe, drums, paint bucket.
ㆍApplicable metals : aluminum, stainless steel, brass, copper etc.

Feature

ㆍAdhere to the heat object at any way flexibly.
ㆍExcellent heat response because the thin sheet.
ㆍCan Used in cleanrooms because there is no dust or odor.
ㆍMainly used by under 200 ° C and so is semi-permanent.
ㆍDesigned to be constant the temperature distribution of the heating surfaces.
ㆍManufactured to the exact temperature that meets your needs because wattage choice in proportion by using temperature.

CAUTION!!

ㆍThermo Couple Connector and Power Connector is not included.
ㆍConsult in accordance with the temperature Controller configuration.
ㆍPlease purchase after identified through consultation after check equipment capacity of the temperature, voltage, etc.

Specifications

Heater resistant temperature

Continuous use temperature
20°C
Maximum temperature
250°C

Power characteristics

Capacity tolerance
±10%
Insulation resistance
1000MΩ over
Withstand voltage
1500V/1min

Measurements

Maximum
400mm×3000mm
Minimum
25mm×50mm
Thickness
1.5mm
Insulator thickness(sponge attached style)
5mm ~ 20mm

* To improve the quality of the product, price, specifications and design are subject to change without notice.

실리콘 러버 히터

Applicationcase

실리콘 러버 히터

맨 위로